Tungsten Carbide Price in November 2026: October’s Crash and V-Shaped Recovery
October 2026 was the most volatile month of the year for China’s tungsten market — and China supplies roughly 75–80% of the world’s tungsten, so its volatility is everyone’s problem. Within a single month, ammonium paratungstate (APT) — the key intermediate for tungsten carbide powder — first fell another 15% on top of an already weak autumn, then snapped back almost the entire decline in the final ten days of the month.
For blade buyers, the message from October is twofold: the downside in this cycle looks capped by policy and supply-side factors, but the cost pass-through to finished carbide products has now formally begun. Here is what happened, why, and how to position your Q1 2027 orders.
October 2026 in Numbers: The V-Shape
Chinese market trackers describe October as a “early-month decline, mid-month bottom, late-month rebound” V-shaped move. The reference points (China domestic, RMB):
| Product (China domestic, approx.) | Early Oct | Mid-Oct low | End Oct | Early Nov |
|---|---|---|---|---|
| APT (88.5%), RMB/tonne | ~550,000 | below 500,000 (spot under 400,000 at the lows) | ~530,000 | 530,000–550,000 |
| 65% black tungsten concentrate, RMB/standard tonne | ~365,000 | ~280,000–344,000 (varies by grade & source) | ~350,000 | 360,000–375,000 |
| Tungsten carbide powder, RMB/kg | ~750 | below 700 | ~780 | 800+ (quotes 830–860 for tungsten powder) |
| Tungsten powder, RMB/kg | ~840 | ~700 | ~780 | 820–860 |
Indicative ranges compiled from Chinese market trackers and monthly averages (October–November 2026). Actual quotes vary by grade, particle size, volume and delivery terms.
On a monthly-average basis (Wind data), October 2026 still printed steep declines: 65% black tungsten concentrate averaged RMB 327,100/tonne, down 19.6% month-on-month; APT averaged RMB 496,800/tonne, down 15.1%; tungsten carbide powder averaged RMB 733.5/kg, down 12.2%. But the month-end recovery means November opened higher than October closed — and, critically, prices remain roughly 20% higher than the same period last year. The correction has been a retreat from a record peak, not a return to old baselines.

Why Prices Crashed in the First Half of October
The first half of October was a continuation of the demand-driven correction that started in April. Three forces were at work:
- Weak end demand. Downstream carbide and tooling producers reported no visible growth in orders. Purchasing stayed strictly need-based: buyers bought only against confirmed customer orders and refused to hold inventory at high prices.
- The “buy on rise, not on fall” psychology. As leading producers cut their fortnightly long-unit purchase prices in early October (55% concentrate down RMB 35,000 per standard tonne, APT down RMB 30,000/t on October 8), spot holders rushed to sell before prices fell further — a classic panic feedback loop.
- Long-unit price catch-down. By October 20, the headline long-unit quotes had fallen to RMB 344,000 per standard tonne for 55% concentrate and RMB 500,000/t for APT, confirming the market’s weakest sentiment of the year.
Why the Rebound Came Just as Fast
The turn started in mid-October and had nothing to do with a demand surge — end-user orders remained soft through the whole month. Instead, the rebound was engineered from the supply side:
- Large producers stepped in and bought APT aggressively. Batch transaction prices climbed from around RMB 380,000/t to RMB 550,000/t within weeks, cutting off the panic-selling loop at its source. Spot APT was trading around RMB 540,000/t in early November.
- Mines and smelters switched to holding. Low-priced spot material disappeared from the market almost immediately after the large-producer purchases became known, and Yunnan mine auction results printed persistent premiums.
- The policy floor is real. China’s tungsten mining quota has been cut for a second consecutive year — from about 112,000 tonnes in 2024 to 92,000 in 2025 and roughly 79,000 tonnes in 2026, a near-30% reduction from the 2024 peak. Ore grades are also declining and safety/environmental oversight keeps tightening, which limits how much actual output the quota can produce.
- The cost pass-through closed on November 9–10. Four of China’s largest carbide producers — Zhangyuan Tungsten, Zigong Cemented Carbide, Zhuzhou Cemented Carbide Group and Xiamen Golden Egret — issued price-increase notices within 48 hours of each other, citing tungsten carbide powder costs rising more than 15% from mid-October. When the whole top tier moves together, the bottom of finished-goods pricing has lifted.
- Structural signals added momentum. The CME announced plans for the world’s first tungsten futures contract; European APT quotes held a wide premium over Chinese FOB (roughly $2,900–3,275/mtu vs. about $2,350/mtu); and scrap carbide rose more than 30% from mid-October as recyclers chased material.
Analysts (including CICC) put the global tungsten supply gap for 2026–2029 at 23,000–25,000 tonnes per year — about 14% of global consumption. That is the backdrop that makes buyers hesitate to assume October’s lows will come back.
What the V-Shaped Move Means for Blade Buyers

Four practical consequences for anyone buying tungsten carbide blades, granulator knives or slitting knives:
1. Your next quotes will be higher. Carbide powder is the largest cost component in a carbide blade, and finished-goods pricing typically lags raw material moves by roughly one to three months. The November price-increase notices mean that Q4/Q1 quotes from carbide suppliers will reflect the October rebound — waiting does not freeze your price, it moves you closer to the higher rung.
2. The floor looks firmer than the ceiling. The rebound was driven by supply-side support (quota cuts, producer purchases, mine holding) rather than demand, so upside momentum is limited while end demand stays soft. Most Chinese market commentators expect range-bound trading with a strong floor — a reasonable read is that mid-October prices marked the bottom of this leg of the cycle.
3. Lead times can stretch in a low-inventory market. Carbide plants are running lean inventories and producing to order. When replenishment demand arrives in bursts, scheduling queues form. Buyers who order a replacement set before their current set wears out — instead of when it breaks — pay the same price but avoid downtime.
4. Quality discipline matters more when material costs swing. Fast-moving scrap and secondary-material markets (scrap carbide +30% in three weeks) create margin pressure toward lower-grade input powders. When you evaluate quotes in this market, treat material consistency as part of the price: work with a manufacturer who documents powder sourcing, follows written heat-treatment specifications, and performs hardness sampling inspection on finished blades — and who will tell you which grade is actually in the quote.
Buyer Playbook: Positioning Q1 2027 Orders
- Lock known requirements now. If your Q1 volumes are already forecastable, the current window — firm quotes, quiet demand, pass-through just beginning — is the best available position. This is the same logic we recommended in our 2026 price tracker, one rung earlier in the cycle.
- Consolidate SKUs and volumes with one supplier. Volume concentration earns you priority in production scheduling and a more defensible price when raw material moves; splitting small lots across traders means paying spot-plus-margin on every reorder.
- Buy on cost per cut, not price per piece. With carbide prices elevated and volatile, a longer-life blade at a 20% premium is usually cheaper per meter cut than the lowest quote that wears out early.
- Agree price-adjustment terms for long programs. For scheduled multi-delivery programs, ask for a material-linked pricing clause instead of a fixed price the supplier may be unable to honor if APT moves again. Transparent mechanisms protect both sides.
Timing purchases against raw-material swings is part of total cost management — working with an experienced industrial blade manufacturer means your replacement schedule is planned against these cycles instead of reacting to them. Our team tracks the tungsten market continuously because it directly shapes the quotes we issue for tungsten carbide blades.
Outlook: Range-Bound With a Strong Floor
The consensus forming after October’s V-shape:
- Short term: range-bound consolidation. Downstream buyers accept current prices but are not chasing them upward; transactions concentrate in small need-based lots at the lower end of quoted ranges. Upside elasticity is limited until real order flow improves.
- What to watch: the big producers’ long-unit purchase prices (the industry’s pricing benchmark), winter mine output under low temperatures and environmental controls, and whether downstream carbide orders actually pick up.
- Structural background: export controls remain in force, the mining quota keeps shrinking, and multi-year supply-gap forecasts cluster around 14% of global consumption. None of these argues for a return to 2025 price levels.
Our working assumption for buyers: mid-October was the bottom of this leg; prices should hold a firm floor through Q1 2027 with volatility on top. Procurement decisions should be made on the assumption that today’s quotes are closer to the cycle’s floor than to its ceiling.
Frequently Asked Questions
How much did tungsten prices fall in October 2026?
On monthly averages, 65% black tungsten concentrate fell 19.6% month-on-month to about RMB 327,100/tonne, APT fell 15.1% to RMB 496,800/tonne, and tungsten carbide powder fell 12.2% to RMB 733.5/kg. At the intra-month lows, spot APT briefly traded below RMB 400,000/tonne. By early November, APT had recovered to RMB 530,000–550,000/t.
Why did tungsten prices rebound so quickly in late October?
The rebound was supply-driven, not demand-driven. Large Chinese tungsten producers began purchasing APT in bulk in mid-October (batch prices climbing from around RMB 380,000 to RMB 550,000/t), which cut off the panic-selling cycle. Mines and traders then withheld material, and in early November the four largest carbide producers announced finished-goods price increases to pass through the higher powder cost.
Will tungsten carbide prices drop again?
Most Chinese market trackers expect range-bound movement with a strong floor: mining quotas have been cut ~30% from their 2024 peak, export controls remain in place, and analyst estimates put the 2026–2029 global supply gap at roughly 14% of consumption. End demand is still soft, which caps the upside — but the same factors that ended October’s crash make a repeat of those lows less likely.
Should I order carbide blades now or wait?
If your requirements are known and your consumption is forecastable, current conditions favor ordering: finished-goods price pass-through started in November, lead times can stretch in a low-inventory market, and the downside looks structurally capped. If your needs are small and flexible, phased ordering with a material-linked pricing clause is a middle path.
How does the tungsten price affect the cost of industrial blades?
For carbide blades, raw material is the largest single cost component, so APT and powder moves feed into quotes with a one-to-three-month lag. HSS blades are less exposed to tungsten pricing but wear faster in demanding applications. In this market, cost per cut — not purchase price — is the more meaningful metric.
Planning Carbide Blade Purchases for Q1 2027?
As an industrial blade manufacturer, we issue quotes with current-quarter material pricing and support scheduled delivery programs for custom carbide blades. If rising tungsten costs are affecting your cutting budget, send us your drawing for a quote — and we will help you time your replacement orders against the material cycle instead of chasing it.